Skip to content
Clear communicationFree inspections
Call now (951) 555-0181
(951) 555-0181 Get my free quote
Roof partly stripped and re-covered with underlayment on a stucco home

Roof replacement in Riverside

Roof replacement in Riverside, done to a written plan

New tile, shingle or flat roofs for Riverside homes. We explain the options, quote in writing and walk you through the permit steps.

  • Written quote with materials listed
  • Tile, shingle and flat roof options
  • Cleanup and a final walk-through

Step 1 of 3

What do you need?

What does roof replacement in Riverside involve?

A roof replacement means removing the old roofing, checking the deck underneath, and installing a new roof system. It is more than new shingles or tile on top. The layers underneath do much of the work of keeping water out.

On a typical job the steps are:

  1. Remove the old surface and underlayment.
  2. Inspect the plywood or boards and replace any that are soft or damaged.
  3. Install new underlayment, flashing at walls, chimneys and skylights, and new vents.
  4. Install the new roof surface, such as composition shingles, concrete tile or a low-slope membrane.
  5. Clean up, sweep the yard for nails and walk the job with you.

If you are still deciding whether you need a full roof, read about roof repair in Riverside first. A repair can be the right call when the damage is limited.

How do I know it is time to replace my roof?

Roofs in Riverside take a beating from sun more than from rain. Heat and ultraviolet light slowly dry out the materials. Look for these signs:

  • Shingles that are curling, cracked or shedding granules into the gutters.
  • Tiles that are cracked, slipped or loose, or underlayment showing through.
  • Leaks or brown stains on ceilings after the first rain of the season.
  • Daylight visible in the attic, or a sagging section of roof.
  • Repairs that keep coming back in different places.

Composition shingle roofs usually wear out in the range of a couple of decades, and strong sun can shorten that. Tile itself can last much longer, but the underlayment beneath it often wears out first. That is a common reason a tile roof is lifted and relaid. A roof inspection in Riverside gives you a clear answer before you spend on a full roof.

What does the cost of roof replacement depend on?

We do not quote over the phone, because two roofs on the same street can be priced very differently. These are the factors that move the number:

  • Roof size and pitch. More area and steeper slopes mean more labor and more safety equipment.
  • Material. Composition shingles, concrete tile, clay tile and metal all cost different amounts to buy and install.
  • Condition of the deck. Rotted or damaged boards are replaced as part of the job.
  • Tear-off layers. Removing more than one old layer takes more time and disposal.
  • Details. Skylights, chimneys, solar panel removal and reinstall, and complex valleys add work.
  • Permit and fire rating requirements for your address.

You get the full price in writing, with the work listed line by line.

Many single-family roofs in Riverside are finished in a few working days. Larger tile roofs and roofs with a lot of repair work underneath can take longer. Weather matters. Work is paused when rain is in the forecast so that an open roof is never left exposed.

What to expect

  • Roofers often start early here, because roof surfaces get dangerously hot by afternoon in summer.
  • Expect noise from tear-off and nail guns during the day.
  • Move cars out of the driveway and take pictures and shelf items off the walls inside, since vibration can shake things loose.
  • Keep pets and children indoors and away from the work area.

When the work is done, we remove debris, sweep the yard for nails and go over the roof details with you.

When should I call, and what should I look for in a contractor?

Call before a small problem turns into a ceiling repair. Good times to call are after a leak, before listing your home, or when your roof is nearing the end of its life. If water is coming in right now, see our page on storm damage roof repair in Riverside.

Before you sign with anyone, ask to see the contractor's California license and proof of insurance. In California, roofing work falls under the C-39 license class, and you can look up any license on the state licensing board website. Get the scope and price in writing, and ask what happens if hidden damage is found under the old roof. You can also browse everything we do on our Riverside roofing home page.

What you can expect

1

Clear communication

2

Free inspections

3

Written estimates

4

Local crew

Questions about roofing in Riverside

How long does a new roof last in Riverside?

It depends on the material and how well the roof is installed and kept up. Composition shingles usually last a couple of decades at best, and sun can shorten that. Concrete and clay tile can last much longer, though the underlayment beneath them often needs replacing sooner. Good ventilation and regular checks help any roof last.

Do I need a permit for roof replacement in Riverside?

Re-roofing generally needs a building permit in California cities. Homes in mapped high fire hazard areas also need fire-rated roofing. The exact rules depend on your address and the work planned, so check with the City of Riverside building department. A roofer who works locally should be able to tell you the steps and who applies for the permit.

Can a new roof go over the old one?

Some building codes allow a second layer of shingles in limited cases, but it hides deck problems and adds weight. A full tear-off is usually the better choice because it lets the crew inspect and fix the deck. Ask your roofer what applies to your roof, and confirm it with the city if you are unsure.

Which roof materials handle Riverside heat well?

Concrete and clay tile cope with heat well and are common on Inland Empire homes. Composition shingles made for high heat and light-colored reflective products can help too. California's energy code includes cool roof rules for many re-roofs, so ask which products are required for your roof type and slope.

What happens to my solar panels during a re-roof?

Panels usually have to be removed before the old roof comes off and put back afterward. That work is normally done by a solar company or a licensed electrician, not the roofer. Plan the dates with both companies early, because panels cannot stay on the roof during tear-off.

Can you replace only part of my roof?

Sometimes. If one slope is worn out and the rest is sound, replacing just that section can make sense. But matching old and new materials is not always possible, and a patchwork can leave weak points where they meet. We look at the whole roof and tell you whether a section or the full roof makes more sense.

Request roof replacement

Tell us what you need and we call you back.

Step 1 of 3

What do you need?

No obligation.

Ready when you are. Call now or request a quote online.

Call for a free inspection

Get my free quote

How it works

  1. Call or request a quote

    Tell us what is happening with the roof.

  2. Free inspection

    A roofer checks the roof and gives a written price.

  3. Work done right

    Clean crew, nail sweep, warranty in writing.