Flat Roof
Flat roof is a common roof type throughout entire Southern California, Los Angeles, Riverside in apartment buildings, industrial complexes, and businesses.
Flat Roof - Introduction
Flat roofs are gaining momentum in popularity among the residential homeowners in Los Angeles, Riverside, and surrounding areas.
With an advanced modern approach to architecture, flat roofs in Los Angeles are becoming an integral design element of the vast majority of homes.
Although they are affordable and easy to install, they also need a bit of attention, that is, roof repair and roof maintenance. This is the reason why you need a trustworthy company doing roofing in Riverside that you can entrust your flat roof needs.
Let’s make one thing crystal clear – a flat roof is not actually flat. A flat roof is a roof that is almost or completely level. Almost all of them are laid to a fall to secure that rainwater can run off down the lower side.
Flat roofs can be constructed from concrete, steel, or wood and come with some sort of barrier in charge of preventing water intrusion.
Anyhow, when it comes to knowing how long it will last, it depends on several factors. Some of them can be predicted while others cannot. For example, regular inspections and maintenance can prolong the lifetime of the flat roof. They come with an extended warranty of 10 to 20 years but can last over 25 years if you take care of them through regular inspections and maintenance.
Flat Roofing Systems: Pros and Cons
There are three main types, and each one comes with its own set of benefits.
Spray-On/Paint-On Flat Roofs
Spray on roofing material is created by mixing isocyanate and polyol under high pressure and heat. Those chemicals are sprayed in liquid form, and upon contact with a surface, react to form a solid but lightweight roofing membrane.
Pros
- Thermal resistance.
- Strength and durability.
- Seamless and self flashing.
- Longevity.
- Ease of maintenance.
Cons
- Limited application frame because they can only be installed when temperatures are higher than 50 degrees Fahrenheit and when humidity is relatively low.
- UV exposure is the main cause of their failures.
Built-Up Flat Roof
Build up roofing, also known as BUR, was one of the most popular types before modified membrane roofing occurred.
Unlike single ply roofing, build up roofing consists of several layers. We have a bottom layer, that is, two insulation boards, multiple layers of asphalt or tar alternated with roofing felt layers, and on top of all of that, a layer of gravel.
The final result is a thick and extremely tough roof assembly that is damage resistant.
Pros
- Offers outstanding protection against harsh weather, UV rays, and water.
- Requires no or little maintenance.
- It is not difficult to remove layers when resurfacing or repairing the roof.
- The gravel makes it extremely resistant to foot traffic abuse.
Cons
- Installing this type is takes time because of the many layers and materials are involved in the process.
- Possible harmful fumes and vapors emission during installation.
- Finding the source of a leak might be challenging.
Single-Ply Flat Roof
There are a couple of single ply roofing materials, including plastic and rubber formulations.
The most common type found in residential properties is EPDM (which stands for the ethylene propylene diene monomer.)
It is a synthetic rubber sheet material people often use as a pond liner.
Single ply roofing consists of a layer of insulation board covered by sheets made from EPDM.
As the very name suggests, it is a waterproofing layer in one single sheet.
Pros
- Rapid, safe, and clean installation.
- Most repairs are inexpensive, quick, and simple (DIY.)
- The roof deck doesn’t require any reinforcement because single-ply roofing is lightweight.
- Leaks are extremely rare, which means there is no surface damage.
- Single-ply roofing can keep heat inside the house to reduce your heating bills.
Cons
- Roof penetrations (e.g. chimneys, HVAC systems, pipes, and so on) make installation more difficult and expensive.
- Penetrations can cause leaking if not flashed correctly.
- Membranes might get punctured by foot traffic during installation, servicing, or falling branches.
Flat Roof Services
Our flat roofing services in Los Angeles include the following:
Repair and maintenance
If you have had a flat roof recently installed and you would like to make the most out of it, then you need regular maintenance and repair services.
No worries at all! Our roofing services in Southern California offer complete repair and maintenance services for all types of flat roofs at the best price on the market!
Equipped with extensive experience in the flat roofing industry, our roofers can assist you in maintaining your flat roof in good shape and avoid expensive repairs.
Replacement
Over time, just like with everything else, Mother Nature can cause flat roofing to decay. Regular roof maintenance and checkups ensure that major problems are addressed or, in other words, that potential damage is prevented on time.
However, we also offer flat roof replacement services if your roof is greatly damaged or needs increased insulation.
Flat roof replacement might be a good investment in the long run because it not only benefits the environment but your wallet as well!
Coating
Professional flat roof coating is in charge of keeping Mother Nature away from your roof.
While there are roofing companies out there that will try at any cost to sell you on an expensive roof repair or replacement at the very first sign of leaking, the sole core of our business is not to make a sale but rather to find the most appropriate solution for your wallet!
As a matter of fact, sometimes, all your roof needs is a new coating that can keep moisture out, extend the lifespan of your flat roof, and regulate the temperature of your house.
We take great pride in the quality of our customer service and final work.
We make sure that each and every customer is one hundred percent satisfied all through the installation, replacement, or coating process from your calling over quotation to the finish.
Whether it is an overall replacement, a teeny tiny leaking, some advice on which system to choose, or anything else in between, we got you covered!
Need A Free Estimate?
We take great pride in the quality of our customer service and final work.
We make sure that each and every customer is one hundred percent satisfied all through the installation, replacement, or coating process from your calling over quotation to the finish.
Whether it is an overall replacement, a teeny tiny leaking, some advice on which system to choose, or anything else in between, we got you covered!